Oil Seal Trimming & Spring Loading Machine

Operation :
This machine is suitable to cut the flash and load the spring with high volume oil seals in the production line.

Vibrating tray vibrates the oil seal to the appropriate location.
The vacuum sucks the oil seal to precisely fit it on the central point of the mold on the spindle.
Able to cut the inner lip and flash simultaneously.
Magnet rotator/Vibrating tray feeds the spring to the appropriate location.
The tooling is pulled fast by the air cylinder to combine the oil seal with the spring.
It will check if the spring is correctly loaded by metal probe and CCD camera.
The machine sorts the parts for good parts and defects.
At the end there must be a counter to count the good seals, after the machine counts the set number the machine will stop with an alarm.
For each stroke of knife there should be a counter to monitor the life of Knife, after the machine counts the set number, the machine should stop automatically for changing the knife with an alarm.